5V Stepper Motor with Driver Board
- Voltage: 5V
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Stepper motor driver board with ULN2003
- Led on board indicates the status of the stepper
- Diameter: 28mm
- Length: 274mm
- Net weight: 43g
An inexpensive little stepper to start learning about controlling stepper motors.
This uni-polar motor has 32 steps per revolution with a 1/64 reduction gear inside. So in total it has 32 * 64 steps per revolution which equals : 2048 steps.
The gearing makes this little stepper torque fairly high for its size, but slower than un-geared steppers. Using double stepping is recommended.